Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy,water resistance,and thermal properties for polyamide 6

The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL‐94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL‐94 V‐0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X‐ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.     

氟苯尼考胶体金免疫层析定量检测方法的建立

建立了定量检测氟苯尼考的胶体金免疫层析方法.对胶体金标记抗体时溶液pH和抗体浓度、金标抗体用量、检测线上抗原浓度以及检测时间进行了优化.采用胶体金试纸条读取仪测定试纸条检测线和质控线的信号强度,以标准品的浓度为横坐标,阳性样本和阴性样本的检测线/质控线的信号比值(Bx/B0)为纵坐标建立标准曲线.结果表明,胶体金免疫层析试纸定量检测氟苯尼考的线性范围为0.1~1.5 ng/mL,检出限为0.08 ng/mL,检测时间为15 min.本方法具有简便、快速和可定量等特点,适于大批量样品的现场筛查.     

Facile one-step extraction and oxidative carboxylation of cellulose nanocrystals through hydrothermal reaction by using mixed inorganic acids

A facile and efficient approach to prepare carboxylated cellulose nanocrystals (CCNCs) is presented through a novel one-step hydrothermal procedure by using a mixed acid system of hydrochloric acid and nitric acid (HCl/HNO₃). The as-prepared cellulose nanoparticles were characterized by scanning electron microscopy, wide angle X-ray diffraction, conductometric titrations, Fourier transform infrared spectrometry and thermal gravimetric analysis. The results showed that the combination of the mixed acid and hydrothermal reaction can speed up the process of CCNC preparation, and then high quality of the product could be obtained at relatively low acid concentration. It is found that the addition of nitric acid could not only promote the conversion of surface groups on the cellulose nanocrystals (CNCs), but also have significant influences on the yield, particle size and microstructure of CNCs. For the volume ratio of HCl/HNO₃ of 7:3, the as-prepared CCNCs exhibited the largest length to diameter ratio and narrowest dimension distributions as well as maximum degree of oxidation of 0.12. In addition, high dispersion stability for the CCNCs could be observed due to the existence of negative carboxyl groups. This approach based on one-step oxidative carboxylation greatly simplified the preparation of CCNCs with high yield and high crystallinity under mild hydrothermal condition.     

基于合成方法学研究的有机化学实验教学改革与实践——以苯甲酸乙酯制备为例

以苯甲酸乙酯的制备实验为例,将合成方法学研究引入有机化学实验教学。采取抽签方式确定每个学生的实验内容,通过考查加热方式(电热套或微波辐射加热)、溶剂(甲苯或环己烷)以及反应时间对实验结果的影响,使学生了解科学研究的方法,并通过文献查阅及实验结果分析讨论等教学实践环节提高学生的创新思维和科研能力。     

双分布聚乙二醇接枝纳米二氧化硅的高效可控制备

在混合溶剂中通过"grafting to"的方法将2种分子量不同的聚乙二醇单甲醚(MPEG M_w=750,4000)接枝到氨基修饰的St?ber法二氧化硅(SiO_2-NH_2)表面,制备双分布纳米接枝复合物.采用二步法,先将带环氧端基的低分子量聚乙二醇单甲醚(MPEG-EO)与SiO_2-NH_2在甲苯溶剂中充分反应后,与高分子量的MPEG-EO在甲苯和正癸烷的混合溶剂中使用相同的反应条件和后处理方法,能便捷制备出具有双分布接枝的纳米复合物.在接枝反应体系中,分子链的链段尺寸和接枝密度之间存在着密切关系.一定的范围内,接枝密度随链段尺寸减小而增大.通过改变混合溶剂比例来调控接枝链段的尺寸,可以很好控制聚合物的接枝密度.在双分布接枝的纳米复合物中,低分子量的接枝密度为0.85 chains/nm~2,高分子量的接枝密度能达到0.40 chains/nm~2,体现出了简单、高效、可控的特点,与聚环氧乙烷(PEO)共混后分散良好,对于制备出均匀分散的纳米复合材料起到了一定的指导作用.     

Stability of the traveling waves for the derivative Schrödinger equation in the energy space

In this paper, we continue the study of the dynamics of the traveling waves for nonlinear Schrödinger equation with derivative (DNLS) in the energy space. Under some technical assumptions on the speed of each traveling wave, the stability of the sum of two traveling waves for DNLS is obtained in the energy space by Martel–Merle–Tsai’s analytic approach in Martel et al. (Commun Math Phys 231(2):347–373, 2002, Duke Math J 133(3):405–466, 2006). As a by-product, we also give an alternative proof of the stability of the single traveling wave in the energy space in Colin and Ohta (Ann Inst Henri Poincaré Anal Non Linéaire 23(5):753–764, 2006), where Colin and Ohta made use of the concentration-compactness argument.     

Novel phosphorescent neutral iridium(III) complex with the steric hindrance for highly efficient red organic light-emitting diodes

A novel and highly efficient thiophenquinolone-based red iridium(III) complex bearing a bulky fluorophenyl moiety is designed and synthesized. The complex shows intensive red phosphorescence (596 nm with shoulder at 642 nm), high photoluminescence efficiency (0.62) and broad full width at half maximum (81 nm). The bulky fluorophenyl moiety introduced into the complex could improve the efficiency of electroluminescence with the maximum current efficiency, power efficiency and the external quantum efficiency up to 29.0 cd/A, 30.4 lm/W and 17.6% due to the effective steric hindrance in solid states.     

Intermolecular H···O═C bonds induced 2D self‐assembly of thiophene based diketopyrrolopyrrole derivative

Compounds with diketopyrrolopyrrole (DPP) and thiophene moieties have attracted considerable attention because of their promising charge transport properties. The molecular conformation and self‐assembly of 2,5‐dihexadecyl‐3,6‐di(thiophen‐2‐yl)‐2,5‐dihydropyrrolo[3,4‐c]pyrrole‐1,4‐dione (TDPP‐C16) molecule have been investigated by scanning tunneling microscopy and density functional theory alculation. The TDPP‐C16 molecules adsorb with their optimized S‐shaped conformation and form a zipper‐like pattern on highly oriented pyrolytic graphite surface. R and S rotated structures are observed. The nanostructure is dominated by intermolecular double hydrogen bonds between C═O of the DPP units and hydrogen atom of thiophene rings in the neighboring molecules in each row. Atomic force microscopy and density functional theory calculation also display the existence of strong intermolecular hydrogen bonding. The results provide molecular evidence for the intermolecular interactions of the surface structure, which could benefit to the design of the organic semiconducting materials and understanding of underlying principle of charge transfer process. Copyright © 2017 John Wiley & Sons, Ltd.     

Solvability of finite groups

H is called an ? _p -embedded subgroup of G, if there exists a p-nilpotent subgroup B of G such that H _p ∈ Syl _p (B) and B is ? _p -supplemented in G. In this paper, by considering prime divisor 3, 5, or 7, we use ? _p -embedded property of primary subgroups to investigate the solvability of finite groups. The main result is follows. Let E be a normal subgroup of G, and let P be a Sylow 5-subgroup of E. Suppose that 1 < d ? |P| and d divides |P|. If every subgroup H of P with |H| = d is ?₅-embedded in G, then every composition factor of E satisfies one of the following conditions: (1) I/C is cyclic of order 5, (2) I/C is 5′-group, (3) I/C ? A₅.